![]() Hold the green parts of the belt unit with both hands and lift the belt unit up, and then pull it out. NOTE : We recommend that you place the drum unit on a clean, flat surface with a piece of disposable paper underneath it in case you accidentally spill or scatter toner.Ħ. Hold the handles of the drum unit when you carry it. Lift the front of the drum unit and pull the drum unit completely out of the machine using the green handles on the drum unit.ĥ. Release the gray lock lever (1) that is on the left side of the machine. Lift the drum unit up and then pull it out until it stops.Ĥ. Press the front cover release button and then open the front cover.ģ. The power switch is located on the lower right side of the machine.Ģ. Turn off the power and unplug the Brother machine.If the message 'Waste Toner Full' appears on the display, follow the steps below. The message is automatically cleared when the box is replaced. Visit to purchase supplies and accessories. The part number for the Waste Toner Box is WT100CL. ![]() The Waste Toner Box is located under the Drum and Belt unit of your Brother machine. It has a life expectancy of approximately 20,000 depending on average page coverage, etc. ![]() The Waste Toner Box collects waste toner that results from the printing process.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |